March 20, 2019, 01:21:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length

Hi all - Welcome back for the second time this month!

I apologize for the inconvenience of the site being offline. The site was down for technical reasons, but it didn't help that I was of offline for two weeks (camping and travel). Once I got back, it took a while to get things sorted out. That's resolved, and the site is now back up. Huzzah!

Please take a minute and read the Site News thread I've posted in the General section, and feel free to comment. Thanks!


   Home   Help Search Login Register  
Pages: [1]
Author Topic: Ecm needs reset after bumpy roads or it leans out.  (Read 3157 times)
Posts: 5

View Profile
« on: January 04, 2017, 03:58:32 AM »

Hey guys,
My rebuilt RTE is treating me wonderfully except for one thing,
After going over rough bumps off roading it will lean out and I'm not sure why
I have to pull the ecm fuse and reset it for it to run the proper mixture again
I'm not sure if the air door is flapping around and throwing the ecm off
Or if maybe I just have something grounding out but I'm wondering if anyone
has had a problem similar to this or any ideas? I'm running an airesearch t3
, osidetiger 4 hole injectors, and the air door is quite a few clicks to the rich side.

Two cylinders
Posts: 454

View Profile
« Reply #1 on: January 09, 2017, 09:17:55 AM »

Is the TPS loose or the connector not tight?

How do you like the Osidetiger injectors? I am also running an Air Research garrett from a 2.3 Mustang

Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!